>

Enter Your Email To Sign Up
For Our E-Newsletter:


You are here > Dodge Charger > 2006-2010 Dodge Charger
Choose a sub category:
2006-2010 Dodge Charger Custom Fenders 2006-2010 Dodge Charger Diffuser
2006-2010 Dodge Charger Eyelids 2006-2010 Dodge Charger Front Nose Clip
2006-2010 Dodge Charger Front Spoilers 2006-2010 Dodge Charger Grilles
2006-2010 Dodge Charger Hood Scoops 2006-2010 Dodge Charger Rear Spoilers
2006-2010 Dodge Charger Widebody Kit
Sort By:
Page of 2
2006-2010 DODGE CHARGER EYELIDS
2006-2010 DODGE CHARGER EYELIDS
Our Price: $79.00

2006-10 DODGE CHARGER CUSTOM FRONT EYELIDS
These custom eyelids fit all Charger models including SRT8 and Superbee, and will give your Charger headlights a more aggressive look. Eyelids install with 3M double sided tape and come in a black gel coat finish that should be scuffed primed and painted, however we do offer them painted matte black to match your trim for an additional charge.
2006-2010 Dodge Charger Custom Vented Fender Bezel $100.00s (Set of Four)
2006-2010 Dodge Charger Custom Vented Fender Bezel $100.00s (Set of Four)
Our Price: $100.00

2006-2010 Dodge Charger Custom Vented Fender Bezels (Set of Four)

Our Custom Front Fender Bezels are an upgrade that will give the front Fenders a sleek deep look. They can be purchased with or without the Honeycomb.

Danko Emblems (Pair)
Danko Emblems (Pair)
Our Price: $100.00

Danko Custom Emblems
2006-2010 DODGE CHARGER LOWER HONEYCOMB
2006-2010 DODGE CHARGER LOWER HONEYCOMB
Our Price: $119.00

2006-2010 Charger 3 Piece LOWER HONEYCOMB GRILLE - Our new lower honeycomb is designed to perfectly match your Daytona grille honeycomb and of course, our entire line of custom honeycomb for our custom 68 and 69 grilles. It is made out of a tough urethane plastic and with epoxy repair putty. This item fits all Chargers except SRT8 and Superbee.
2006-2010 DODGE CHARGER FRONT SPOILER
2006-2010 DODGE CHARGER FRONT SPOILER
Our Price: $189.00

2006-2010 DODGE CHARGER CUSTOM FRONT SPOILER- This custom spoiler gives the Charger a factory race look while leaving you 6 1/2″ road clearance. It looks very low from the front but this is an illusion as you can see from the side view. This spoiler bolts right up to the front lower bumper cover with a bolt flange using seven nuts and bolts which are provided. The great thing about this design is that if your car has the factory Daytona Spoiler you can remove it and install ours using the same bolt hole locations without drilling new holes in your fascia. This makes for an easy switch back to the factory spoiler. This spoiler fits only the standard Charger nose that comes on the SE, SXT, R/T and Daytona. We do also have the Srt8 Front Spoiler.
2006-2010 DODGE CHARGER SRT8 FRONT SPOILER
2006-2010 DODGE CHARGER SRT8 FRONT SPOILER
Our Price: $239.00

2006-2010 DODGE CHARGER SRT8 CUSTOM FRONT SPOILER
This custom spoiler will give your Charger SRT8 or Superbee a factory splitter race look while retaining you factory ground/road clearance. It looks very low from the front but this is an illusion. Spoiler bolts right up to the front lower bumper cover with a bolt flange using nine nuts and bolts which are provided. This spoiler will not fit the standard Charger nose that comes on the SE, SXT, R/T and Daytona. Spoilers come in a black gel coat finish that should be scuffed primed and painted, however we do offer them painted matte black to match your trim for and additional charge.
2005-2012 DODGE CHARGER SRT8 STYLE SHAKER GRILLES
2005-2012 DODGE CHARGER SRT8 STYLE SHAKER GRILLES
Our Price: $239.00

2005-2012 DODGE CHARGER SRT8 STYLE SHAKER GRILLES -These Grilles will perfectly match your Daytona and SRT8 Charger front grille as well as our 68 and 69 Custom Danko Upper and Lower Grilles. They will also fit in the original 426 hemi scoop for a custom resto-mod look!
2006-2010 DODGE CHARGER REAR SPOILER 1-PIECE
2006-2010 DODGE CHARGER REAR SPOILER 1-PIECE
Our Price: $269.00

2006-2010 DODGE CHARGER REAR SPOILER -V2RS - Our brand new custom V2RS spoiler is designed to give you that NASCAR/OEM look while increasing down force at high speeds. It is designed to install using it’s 3 removable mounting studs or for a drill free installation, it can be bonded onto the trunk via it”s integrated inner bonding/mounting surface. Although, it also comes with 3M double sided mounting tape on the front and back edge, we do not advise that you rely on the tape for maximum safety and security. Fits 2006-10 Chargers.
2006-2010 DODGE CHARGER  FENDERS-  VENTED
2006-2010 DODGE CHARGER FENDERS- VENTED
Our Price: $599.00

2006-2010 Dodge Charger Vented Front Fenders
Our Custom Front Vented Fenders combined the Classic Look of the Original Chargers with the sleek look of the new. These Shapely Fenders have a perfect fit come either vented or Non Vented and are sold in pairs.

This item qualifies for our 50% Down Easy Pay Layaway Option. CLICK HERE to find out more!

2006-2010 DODGE CHARGER SHAKER HOOD SCOOP
2006-2010 DODGE CHARGER SHAKER HOOD SCOOP
Our Price: $895.00

2006-2010 DODGE CHARGER SHAKER HOOD SCOOP- Designed to be installed on your OEM/Factory aluminum hood, this system is a great advantage over purchasing an after market fiberglass hood since your factory aluminum hood will not require the additional expense of painting the entire hood and blending in the fenders and nose for a perfect match. Also it will not warp and become wavy from the extreme heat like most fiberglass hoods tend to do. The hole in the OEM hood must be cut using a jigsaw; Of course all templates, necessary hardware and instructions along with a thorough online assembly pictorial are included for an easy and successful installation of the bottom hood brace and trim ring – email us if you would like the link. This kit is functional in the way that it routes cold air to the air box if a CAI cold air intake is used. This version is not a sealed system but it will deliver plenty of cold air directly to the top of your existing CAI or can be installed directly over your stock air box as well; This Kit fits the 5.7L Hemi, but can be upgraded to work with the srt8 6.1L Hemi for an additional charge. We are currently working on our 3.5L V6 Shaker Unit, so please see our COMING SOON page for more info! If you are interested in our sealed system Please see below.This kit is so true to the original Hemi Cuda of the early 70′s that even the OEM 1770-73 Shaker Grilles or Our brand new SRT8/Daytona Honeycomb shaker grilles (sold separately) can actually be used instead of the provided honeycomb aluminum mesh.This Shaker kit includes all mounting hardware,instructions and templates. Because of the complexity of our shaker systems, all Danko Shaker systems are considered special orders. This is our own unique design so you can count on a Danko quality fit and finish.

This item qualifies for our 50% Down Easy Pay Layaway Option. CLICK HERE to find out more!

   
 

Copyright ©  store.dankoreproductions.com. All Rights Reserved. Built with Volusion